JP Doublring™ Sights.
Blaze Orange Front Ring. Your next sight picture should look like this.
From the first moment I saw ghost ring sights on a pistol, I felt that they had some real potential for practical pistol or speed shooting applications. However, it was immediately apparent that the aperture rear sight was not compatible with the post-type front sights in use at the time. Your mind will simply not align a rectangle in a circle naturally; most likely, you will tend to vertically string on the target as your speed picks up. Dispensing with the post, I tried rifle-type bead front sights, and found that it was a dramatic improvement. However, that arrangement still had too much “dead air” around the bead, and you had to be very careful on precision shots to ensure adequate alignment. Increasing the size of the bead or restricting the rear aperture to improve alignment was made at the sacrifice of field of view, and consequently the speed advantage was lost.
This process finally evolved into our patented tubular front sight and DOUBLRING sight system, which are the fastest and most precise metallic sights I have ever used. Your mind has no problem processing the concentric alignment of the circles with the greatest speed and precision, and with the blaze orange fluorescent coating applied, losing the front sight while shooting becomes almost impossible.
When teamed with our angled self-shadowing rear aperture sights, our tubular front sight gives a no-compromise balance between speed and accuracy. You actually have two types of sight pictures available on demand. For all-out speed, simply get the front ring in the rear ring, and you’ll have an A-zone hit guaranteed out to 15 yards. For real accuracy though, you can actually see your point of impact through the front sight for an extremely high-confidence sight picture. You can’t beat it for steel targets in front of no-shoots, and for 50-yard standard exercises, you can shoot the accuracy potential of your gun with greater speed than any other metallic sight system.
This is the first non-optical sight system that didn’t make me feel that I was sacrificing something to a dot sight. In fact, on short- to medium-range targets, my speed is actually greater with the same level of precision. If you’re like me, on the bad side of 40 with eyes that will no longer focus precisely on the front sight, this is a vast improvement. Front sight acquisition is the name of the game. In the past few years, as my vision has receded out in focal length, it became nearly impossible to shoot a tight post and notch sight setup. With the DOUBLRING sights, a tight front sight focus is not as necessary because your mind does a fairly good job at visually aligning the front and rear sights with acceptable concentricity even if they’re not quite in focus. Granted, it’s still nice to look at a crystal-clear front sight, and I have solved that problem with a special set of glasses, but at least I can shoot these sights even when I can’t focus precisely on them. In fact, I call them my geriatric sights.
Now that we’ve had these sights out on the market for several years, we have had quite a bit of feedback. Customer satisfaction has been overwhelming. One IPSC limited shooter said that the sights brought his performance up a whole class, and he was actually winning local matches against Open Class equipment with his Limited gun.
The newest versions of thes sights feature our own high-quality adjustable rear sights which fits in a standard Bomar, LPA or Kimber sight cut. Other versions fit standard 1911 and Browning Hi-power, and we also added a Colt Gold Cup version with drop-in rear and cross dovetail front.
The cross dovetail is the most popular custom pistol front sight installation, and that is what we have opted to produce. It can be easily fitted to your existing .330 or .300 sight cut as we have made the dovetail feature an oversized .330x65. Our .200 low front is also compatible with many other ghost ring rear sights. If your pistol is not so equipped, we will install the front sight for you with a two week turnaround. Our Glock rear sights will feature a shim method of elevation correction to allow for precise zero. A bottle of our fluorescent Sightcoat is included for initial coating and touch ups of front sight with every set. The Sightcoat is also very useful for other high-visibility sight needs.
| JPGR-BM | JP adjustable ghost ring rear sight to fit Bomar BMCS sight cut | $59.95 |  |
|
| JPDR-BM |  | JP Doublring Sight Set for Bomar Cut | $120.00 | |
| JPDR-GC |  | JP Doublring Sight Set for Colt Gold Cup with Eliason read, cross dovetail front | $79.95 | |
| JPDR-HP |  | JP Doublring Sights for Browning High Power with fixed rear | $89.95 | |
| JPDR-KA |  | JP Doublering Sight Set For Kimber With Factory Adjustable Rear Sight | $120.00 | |
| JPDR-LPA |  | JP Doublring Sight Set for LPA Rear and .200 Low Profile/LDA Front Sight | $120.00 | |
| JPSC |  | JP Fluorescent Sightcoat | $5.99 | |
New Video Gallery
Related Products
- JPoint - ACOG® with JP Reticle - Trijicon Optics - Detachable - Doublring
© 2008 JP Enterprises. All rights reserved.