This page requires that you activate javascript in your browser settings.
However, a non javascript version of the site is available here

banner
Recoil Eliminator | Competition Series | Large Profile | Tactical | Attachment | FAQ

Recoil Eliminators

Whether you're a practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then—it was the 90s, remember—and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.

Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.

A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.

Read More >>>


Recoil Eliminators
JPRE-2BJP Recoil Eliminator
   AR-15-type rifles
   .750 OD
   1/2-28 TPI
   Matte black
$119.95
JPRE-2SJP Recoil Eliminator
   AR-15-type rifles
   .750 OD
   1/2-28 TPI
   Stainless Steel
$119.95
JPRE-324BJP Recoil Eliminator
   AR-10-type rifles
   5/8-24 TPI
   .750 OD
   Matte black
   .350 exit hole for .308
$119.95
JPRE-324SJP Recoil Eliminator
   AR-10-type rifles
   5/8-24 TPI
   .750 OD
   Stainless Steel
   .350 exit hole for .308
$119.95
JPRE-412BJP Recoil Eliminator
   Bull Barrels
   1/2-28 TPI
   .875 OD
   Matte Black
$119.95
JPRE-412SJP Recoil Eliminator
   Bull Barrels
   1/2-28 TPI
   .875 OD
   Stainless Steel
$119.95
JPRE-424BJP Recoil Eliminator
   AR-10-type rifles (Bull Barrel)
   5/8-24 TPI
   .875 OD
   Matte black
   .350 exit hole for .308
$119.95
JPRE-424SJP Recoil Eliminator
   AR-10-type rifles (Bull Barrel)
   5/8-24 TPI
   .875 OD
   Polished Stainless Steel
   .350 exit hole for .308
$119.95
JPRE-428BJP Recoil Eliminator
   Bull Barrels
   5/8-28 TPI
   .875 OD
   Matte black
$49.95
JPRE-428SJP Recoil Eliminator
   Bull Barrels
   5/8-28 TPI
   .875 OD
   Stainless Steel
$49.95
JP Double Crush Washers
JPCW12B.750JP Double Crush Washer

1/2-28
.750 OD
Black
$4.95
JPCW12S.750JP Double Crush Washer

1/2-28
.750 OD
Stainless
$5.95
JPCW58B.750JP Double Crush Washer

5/8-24
.750 OD
Black
$4.95
JPCW58S.750JP Double Crush Washer

5/8-24
.750 OD
Stainless
$5.95

Recoil Eliminators

Back in 2002, John Paul partnered up with shooter Chad Peterson for the 2002 D&L International Tactical Rifle Championship. Peterson was a last-minute addition, leaving him only a few weeks to prepare for the two-man team event. Using a custom Remington Sendero in .300 Win Mag., he would be shooting targets from 300 to 1000 yards. With the JP Recoil Eliminator, Peterson was able to fire nearly a thousand rounds of ammunition in load development, zero acquisition and everyday practice without any physical abuse. Even after firing over 300 rounds in the three days before the event, he was able to shoot the match--another 150 rounds--with no recoil fatigue and turn in a top showing at the match. Without the JP Recoil Eliminator, that prep and performance would simply not have been possible.

The goal of this brake's design was to eliminate as much as best as possible the actual recoil impulse, which is the main cause of muzzle flip. In other words, the Recoil Eliminator solves the problem not just the symptom. This results in a very neutral feel to the firing rifle unlike some brakes that depend primarily on the thrust effect. We've seen a number of rifle comps that actually produce a "negative muzzle flip," which is much more difficult to deal with than a rifle with no compensation. Your natural feedback loop can compensate for a positive flip with considerable speed but not a negative flip.

Normally, when the bullet leaves the muzzle, high pressure gasses acting against the muzzle at that instant become a significant component of perceived recoil. Therefore, reducing recoil and the associated muzzle flip becomes a simple accounting problem. If you can just vent these gasses before the bullet leaves the bore, you create a noticeable difference. If you harness these gasses by directing them against an opposing baffle surface, a forward thrust is generated, which counteracts the recoil impulse of the weapon. The remaining recoil impulse is nearly linear so sight recovery is almost instantaneous. In fact, it is even possible to spot your own hits, and one of our customers said that he was able to take a follow-up shot at a prairie dog at about 350 yards with his AR-15 before the first bullet impacted.

In raw numbers, you'll find that the energy of the gasses from a 20-inch .223 rifle contribute about 70% of the muzzle energy of the projectile. If you do nothing with that force, it is added to the overall recoil impulse. If you can utilize that energy at a decent level of efficiency to subtract from the recoil impulse, you can see the potential. If you watch the now famous video segment of an 11-inch M16 fitted with a Recoil Eliminator, it appears to be recoilless because the muzzle energy of the projectile from the short barrel is nearly equal to the kinetic energy of the high-pressure gas that is being harnessed by the brake.

On larger bore rifles, the effect is equally impressive. You can shoot a .270, 30-06, .300 mag. or larger rifles all day with no recoil fatigue. One of our demo rifles is a .270 bolt gun, n fact. If you hold that rifle up with the butt plate about one inch from your face and pull the trigger, it will barely tap the tip of your nose. Everyone knows how punishing it is to fire a high-powered lightweight hunting rifle off a bench rest. You have to crunch your face into the stock and tense your whole upper body to avoid having the scope permanently imbedded in your skull. By allowing you to completely relax instead of anticipating that punishing recoil, accuracy improves considerably. We have customers who use .300 mags. for varmint rifles and fire hundreds of rounds in a sitting.

Ask anyone who has used one of our recoil eliminators—they'll tell you the effect is nothing short of amazing. If you are an IPSC action rifle competitor, that translates into blazing speed of target engagement with outstanding accuracy. On close-range field courses with an AR-type rifle, your splits on double tapping paper targets are only limited by the agility of your trigger finger. The rifle will not leave your point of aim. There's a reason this is the part that launched the JP brand.

<<< Back

Competition Series Compensators

The JP Compensator was born out of the days of the SOF (Soldier of Fortune World Championship) series matches. After enough pressure, match administrators finally allowed compensators but deliberately disqualified our classic JP Recoil Eliminator with their 1" x 3" dimensional limitation. That has carried forward in all subsequent matches. In its own way, it was a compliment to us for offering too effective a product, but it didn't stop us from developing a brand new compensator that, even at a smaller size, could still perform recoil reduction wonders.

Working in other professional shooters, we arrived at last at a truly high-performance, match-legal rifle compensator that maximizes the potential of the common size limitation while maintaining nearly the same recoil reduction and neutrality that characterized the original JP Recoil Eliminator. To this day, the JP Compensator is the standout most efficient device of its type. Since its release, the JPTRE series has grown well beyond its competition origins. For years, it's been the choice of shooters who prefer a slimmer, more compact configuration without crossing over into a more tactical aesthetic.


JP Compensators | Competition Series
JPTRE3-2B3-Port Compensator
1/2-28 TPI
.750 OD
.281 Exit
Matte Black
$109.95
JPTRE3-2S3-Port Compensator
1/2-28 TPI
.750 OD
.281 Exit
Polished Stainless
$109.95
JPTRE3-2TI3-Port Compensator
1/2-28 TPI
.750 OD
.281 Exit
Polished Titanium
$164.95
JPTRE3-324B3-Port Compensator
5/8-24 TPI
.750 OD
.350 Exit
Matte Black
$109.95
JPTRE3-324S3-Port Compensator
5/8-24 TPI
.750 OD
.350 Exit
Polished Stainless
$109.95
JPTRE3-324TI3-Port Compensator
5/8-24 TPI
.750 OD
.350 Exit
Polished Titanium
$164.95
JPTRE3-412B3-Port Compensator
1/2-28 TPI
.875 OD
.281 Exit
Matte Black
$109.95
JPTRE3-412S3-Port Compensator
1/2-28 TPI
.875 OD
.281 Exit
Polished Stainless
$109.95
JPTRE3-424B3-Port Compensator
5/8-24 TPI
.875 OD
.350 Exit
Matte Black
$109.95
JPTRE3-424S3-Port Compensator
5/8-24 TPI
.875 OD
.350 Exit
Polished Stainless
$109.95
JPTRE3-236B3-Port Compensator
1/2-36 TPI
.750 OD
.406 Exit (9mm)
Matte Black
$109.95
JPTRE3-236S3-Port Compensator
1/2-36 TPI
.750 OD
.406 Exit (9mm)
Polished Stainless
$109.95
JPTRE3-236TI3-Port Compensator
1/2-36 TPI
.750 OD
.406 Exit (9mm)
Polished Titanium
$164.95
JPTREV-236SVertical Port Compensator
1/2-36 TPI
.750 OD
.406 Exit (9mm)
Polished Stainless
$131.95
JP Double Crush Washers
JPCW12B.750JP Double Crush Washer

1/2-28
.750 OD
Black
$4.95
JPCW12S.750JP Double Crush Washer

1/2-28
.750 OD
Stainless
$5.95
JPCW58B.750JP Double Crush Washer

5/8-24
.750 OD
Black
$4.95
JPCW58S.750JP Double Crush Washer

5/8-24
.750 OD
Stainless
$5.95

Large-Profile Compensators

For those who prefer the slimmer, more conventional appearance of the JP Compensator line but who demand maximum performance truly on par the effectiveness of JP Recoil Eliminator, the TRE-5 Series of our compensators fits the bill. At 1.2" outside diameter, these compensators don't meet the 1" x 3" restriction that spawned the original JP Compensators, but for the duty use, hunting, recreation, or most any other use, the TRE-5 Series offers a slight edge on performance over its little brothers without a radical aesthetic departure.

The JPTRE-5 Series compensators are available for .750, .875" and .925" barrel diameters to allow for a precise blend to the most common barrel profiles.


JP Compensators | Large Profile
JPTRE-5.12B.875Large-Profile Compensator
1/2-28 TPI
.875 OD
.281 Exit
Matte Black
$109.95
JPTRE-5.12S.875Large-Profile Compensator
1/2-28 TPI
.875 OD
.281 Exit
Stainless
$109.95
JPTRE-5.12B.925Large-Profile Compensator
1/2-28 TPI
.925 OD
.281 Exit
Matte Black
$109.95
JPTRE-5.12S.925Large-Profile Compensator
1/2-28 TPI
.925 OD
.281 Exit
Stainless
$109.95
JPTRE-5.58B.750Large-Profile Compensator
5/8-24 TPI
.750 OD
.350 Exit
Matte Black
$109.95
JPTRE-5.58S.750Large-Profile Compensator
5/8-24 TPI
.750 OD
.350 Exit
Stainless
$109.95
JPTRE-5.58B.925Large-Profile Compensator
5/8-24 TPI
.925 OD
.350 Exit
Matte Black
$109.95
JPTRE-5.58S.925Large-Profile Compensator
5/8-24 TPI
.925 OD
.350 Exit
Stainless
$109.95
JP Double Crush Washers
JPCW12B.750JP Double Crush Washer

1/2-28
.750 OD
Black
$4.95
JPCW12S.750JP Double Crush Washer

1/2-28
.750 OD
Stainless
$5.95
JPCW58B.750JP Double Crush Washer

5/8-24
.750 OD
Black
$4.95
JPCW58S.750JP Double Crush Washer

5/8-24
.750 OD
Stainless
$5.95

Tactical Compensators and Flash Hiders

"Tactical" has been the watchword of the AR business for several years with many shooters preferring a more duty-ready appearance in their AR. Not satisfied with many of the more tactical compensators available, we had to make our own but without sacrificing the reputation we had for recoil reduction solutions that goes back over twenty years to our original Recoil Eliminator. Even as the smallest JP comp. yet in terms of OD, we're pleased to say the Tactical Series can still stand with the best, providing dramatic recoil reduction with no accuracy degradation.

Available for both .223 and 9mm, the Tactical Series comes in sub-.875, making it NRA Law Enforcement 3-Gun legal. Each model is also pin-and-weld ready with a pre-drilled barrel shroud and included pin to jump your 14.5" barrel up to the legal 16" configuration.


JP Compensators | Tactical Profile
JPTC-9MMTactical Compensator
   1/2-36 TPI (9mm)
   .850 OD
   .406 Exit
   Matte Black
$69.95
JPTC-556Tactical Compensator
   1/2-28 TPI
   .850 OD
   .281 Exit
   Matte Black
$69.95
JP Flash Hider
JPFH-556LJP Flash Hider
   1/2-28 TPI
   .850 OD
   QPQ Finish
$79.95
JPFH-762LJP Flash Hider
   5/8-24 TPI
   .850 OD
   QPQ Finish
$79.95
Thread Protectors
JPTP1/2X28 .750BThread Protector in 1/2x28 thread and .750 OD$16.95
JPTP1/2X28 .875BThread Protector in 1/2x28 thread and .875 OD$16.95
JPTP1/2X28 .920BThread Protector in 1/2x28 thread and .920 OD$8.95
JPTP5/8X24 .750BThread Protector in 5/8x24 thread and .750 OD$16.95
JPTP5/8X24 .875BThread Protector in 5/8x24 thread and .875 OD$16.95
JP Double Crush Washers
JPCW12B.750JP Double Crush Washer

1/2-28
.750 OD
Black
$4.95
JPCW12S.750JP Double Crush Washer

1/2-28
.750 OD
Stainless
$5.95
JPCW58B.750JP Double Crush Washer

5/8-24
.750 OD
Black
$4.95
JPCW58S.750JP Double Crush Washer

5/8-24
.750 OD
Stainless
$5.95

Muzzle Attachments


JP Double Crush Washers
JPCW12B.750JP Double Crush Washer

1/2-28
.750 OD
Black
$4.95
JPCW12S.750JP Double Crush Washer

1/2-28
.750 OD
Stainless
$5.95
JPCW58B.750JP Double Crush Washer

5/8-24
.750 OD
Black
$4.95
JPCW58S.750JP Double Crush Washer

5/8-24
.750 OD
Stainless
$5.95

JP Jam Nuts
JPJN.12B.750JP Jam Nut 1/2 x 28 Thread, .750 OD, Mag Phosphate$12.95
JPJN.12S.750JP Jam Nut 1/2 x 28 Thread, .750 OD, Stainless$12.95
JPJN.12B.875JP Jam Nut 1/2 x 28 Thread, .875 OD, Mag Phosphate$12.95
JPJN.12S.875JP Jam Nut 1/2 x 28 Thread, .875 OD, Stainless$12.95
JPJN.12B.925JP Jam Nut 1/2 x 28 Thread, .925 OD, Mag Phosphate$12.95
JPJN.12S.925JP Jam Nut 1/2 x 28 Thread, .925 OD, Stainless$12.95
JPJN.58B.750JP Jam Nut 5/8 x 24 Thread, .750 OD, Mag Phosphate$12.95
JPJN.58S.750JP Jam Nut 5/8 x 24 Thread, .750 OD, Stainless$12.95
JPJN.58B.875JP Jam Nut 5/8 x 24 Thread, .875 OD, Mag Phosphate$12.95
JPJN.58S.875JP Jam Nut 5/8 x 24 Thread, .875 OD, Stainless$12.95
JPJN.58B.925JP Jam Nut 5/8 x 24 Thread, .925 OD, Mag Phosphate$12.95
JPJN.58S.925JP Jam Nut 5/8 x 24 Thread, .925 OD, Stainless$12.95

FAQ

How do I know which compensator I need?

First, you will need to know the threading of your barrel, which is usually 1/2-28 for an AR-15 (.223/5.56) and 5/8-24 for an AR-10 (.308/7.62), though there are exceptions. Second, you'll need to measure the outside diameter of your barrel. We have muzzle devices to accommodate several ODs, but if we don't offer one to match yours barrel exactly, it's best cosmetically to choose a comp. that is slightly larger than the barrel and then break the transition with a jam nut or crush washer. Some of our comps. include a crush washer, which will be indicated in their descriptions. Finally, you'll need to mind the exit hole required for the cartridge you're shooting. On most cases, the exit hole can be opened to accept large cartridges.

Return to Top

Do you offer installations of your comps?

We no longer perform this service onsite, but E. Arthur Brown stocks our compensators and can time and blend them to your barrel.

Return to Top

How will your comp work with my rifle?

Comps are designed to work by redirecting gas, and ours are most effective when used with an overbore Magnum with a large case for the diameter of the bullet such as .300 Win Mag, .300 Weatherby, .30-378 Weatherby Magnum, 6.5 x 284 Norma, etc. While still effective, the performance difference is less dramatic with large, heavy bullets and straight-walled cases.

Return to Top

How much recoil reduction can I expect?

This is a question with no simple answer, as there is no ideal basis for comparison. Many factors contribute to the recoil impulse, and everyone perceives that impulse differently. The type of firearm and action, weight and length of the barrel, caliber, weight of projectile and powder charge are all of factors that need to be considered.

Understanding the basic principles of how compensators work is a good place to start. As the bullet exits the bore, there is a mass of expanding, high velocity gas exiting behind it. For every action there is an equal and opposite reaction, and the intense pressure and force of the escaping gas creates a rearward thrust that is transferred through the firearm and into the shooter as recoil. The weight and momentum of the projectile traveling down and exiting the bore is also responsible for that rearward thrust. Think of recoil in two parts: one is the recoil caused by the projectile (bullet recoil) while the other is the recoil caused by the exiting gas (gas recoil). There is nothing we can do to counter the effects of bullet recoil except to shoot a lighter bullet. Gas recoil, however, can be tamed, and this is where the compensator comes in. Compensators/muzzle brakes harness the energy of gas recoil and use it to the shooter's advantage by redirecting it.

Our JP muzzle treatments each have large baffle surfaces that allow the bullet, but not the gas, to pass through unmolested. As the gas impacts these baffles, it does so with such great force that it actually creates a forward thrust, counteracting the bullet recoil and stabilizing the whole platform. The bulk of the escaping gas is broken up and redirected out the sides and/or top of the compensator instead of adding to the recoil by exiting straight out the front. A hot cartridge compared to its relatively light-weight projectile, the .243 Winchester, for example, has so much gas recoil that it becomes virtually recoilless with a good, efficient compensator like the JP Recoil Eliminator. The average reduction of recoil experienced with our muzzle treatments is about 70%, but you may see more or less given your particular circumstances. When you consider the punishing recoil of a magnum rifle cartridge, it's easy to see how a he addition of a compensator will allow you to fire hundreds of rounds in a session without the recoil fatigue normally associated with such cartridges.

Return to Top

How loud are your compensators?

Compensators by their very nature redirect gasses towards bystanders and in some cases back towards the shooter, which leaves an impression of increased noise. Regardless of whether or not each shot is actually louder, many of us know that shooting next to someone with a large muzzle brake can seem unusually percussive. Unfortunately, this is unavoidable, and as with many things, calls for a compromise. Compensators advertised as "quiet" will also be the least effective in reducing recoil. The best solution is still the use of quality hearing protection. JP Enterprises strongly encourages the use of eye and ear protection every time you shoot.

Return to Top

Do you offer a pin & weld option?

For any of our complete rifles, upper assemblies or barrel kits, we offer a pin/weld attachment option with any of our muzzle devices to reach an ATF-legal length of 16".

Pin and Weld Photo Pin and Weld Photo

Return to Top








Check out our video library


Related Products

Barrels Heat Sinks Low Mass Operating System Modular Hand Guards Gas Systems Recoil Eliminators Tactical Compensators Fire Control Components Stocks and Grips